Emblaser 2 Laser Cutter/Engraver, 500 X 300 X 50 mm bed, with Air Assist, Camera, WiFi - CSA Approved for our Canadian Customers
Perfect for the classroom. The Emblaser 2, by Darkly Labs, is the second generation desktop laser cutter and engraver that is a perfect combination of ease-of-use, size, power and price. Designed to be user friendly, easy to setup, safe and easy to use in any classroom.
The Emblaser 2 can cut, mark or engrave on the following materials:
- and much more...
Rear filter vent - Emblaser 2 from Darkly Labs. Traditionally laser cutters have only been available for specialized learning areas, but the Emblaser 2 is a Class 1 laser making is safe to use in any classroom when combined with it’s air filtration unit.
The AS/NZS IEC 60825 classification divides lasers into 6 classes, with 6 being the highest and most harmful. The Emblaser 2 is a Class 1 device considered the safest and does not permit human access to laser radiation during operation.
Give depth to your work
Depth Control - Emblaser 2 from Afinia 3DA true 3D cutting & engraving machine, the Emblaser 2 allows you to achieve different levels of depths and details.
It gives your piece that extra dimension by giving you the control to adjust the height of the laser while cutting. Cut through thicker materials by setting your laser to automatically lower with multiples passes.
Common Materials Thickness | Engrave | Cut | Notes
Fabric – Cotton 3mm Y Y
Fabric – Felt 6mm N Y All colors except white.
Leather – Brown Vegetable Tanned 4mm Y Y Treatment & color dependant. Air-Assist recommended.
Paper/Card – Corrugated Cardboard 6mm Y Y
Paper/Card – Pasteboard 2.6mm Y Y
Paper/Card – Plain Paper 3mm Y Y Any color.
Plastic – Acrylic Black 5mm Y Y
Plastic – Acrylic Green, Red Yellow 3mm Y Y
Plastic – Acrylic Translucent (tinted) – Y N
Plastic – Acrylic Blue – Y N
Plastic – Acrylic Transparent & White – N N
Plastic – Polypropylene 3mm Y Y Air-Assist recommended.
Plastic – Styrene 1.5mm Y Y
Wood – Birch Plywood 6mm Y Y
Wood – Balsa 10mm Y Y
Wood – Hardwood Oak 3.8mm Y Y
Wood – MDF 6mm Y Y
Anodised Aluminium – Y N
Slate – Y N
Corkboard 3.0mm Y Y Air-Assist required.
Rubber 2.0mm Y Y Air-Assist recommended.
|Emblaser Technical Specifications|
|Dimensions||540mm x 720mm x 200mm (21.25″ x 28.35″ x 7.8″)|
|Material Capacity||500mm x 300mm x 50mm (19.66″ x 11.81″ x 1.97″)|
|Optics – Focus||Factory pre-focused|
|Laser Unit Type||Laser Diode — 5+ watts|
|Classification||Class 1 — The safest laser device rating available.|
|Cooling||Air-cooled — No water pump required|
|Hardware||• 3D Cutting & Engraving, fully software controlled • Air-Assist System installed • Camera for material alignment|
|Connectivity||Wifi & USB|
|Fume Extraction||Built-in fan and external hose|
|Warranty||• 1-Year Limited Warranty • 6-Month Warranty on Laser Diode|