Robot Virtual Worlds - VEX 4.X - Annual License (1-seat) (210-5503)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Non-Expiring License (1-seat) (210-5504)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Annual Team License (6-seat) (210-5505)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Non-Expiring Team License (6-seat) (210-5506)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Annual Classroom License (30-seat) (210-5507)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Non-Expiring Classroom License (30-seat) (210-5508)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Annual Site License (One Classroom) (210-5509)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Annual Site License (Unlimited Use) (210-5510)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Homework Pack (180-day) (210-5511)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
Robot Virtual Worlds - VEX 4.X - Homework Pack (365-day) (210-5512)
Robot Virtual Worlds, developed by Robomatter, is a high-end simulation environment that enables students to learn programming when a robot isn’t available. Robot Virtual Worlds simulates VEX EDR and VEX IQ robots in 3D environments which can be programmed using the same language as physical robo..
VEX Cortex Video Trainer (210-5515)
The VEX EDR Video Trainer (using ROBOTC for VEX Robotics) provides step-by-step videos, PDFs, rubrics, and so much more to get you up and running with the VEX ARM® Cortex®-based Microcontroller. The video trainer includes tutorials around Programming Fundamentals, the Engineering Process, Microcontr..
VISE,YOST,4" BENCH VISE
VISE,YOST,4" BENCH VISE..
TOOL HOLDER,MAGNETIC,13"
TOOL HOLDER,MAGNETIC,13"..
CLAMP MOUNT OUTLET AND USB CHARGER
CLAMP MOUNT OUTLET AND USB CHARGER..
BEST Control System Kit (270-1605)
The official control system kit for the BEST Robotics Competition.Control Components:•(1) Cortex Microcontroller•(1) VEXnet Joystick•(2) VEXnet Key 2.0Note: The first generation VEXnet USB Adapter key and the new VEXnet Key 2.0 are both legal for use in the BEST Robotics Competition.Motion Component..
BEST Servo Kit (270-1682)
The official servo kit for the BEST Robotics Competition:•(4) Servos•(4) Servo Horn Screws•(4) Large Round Servo Horns•(8) 4-Arm Servo Horns•(4) 6-Arm Servo Horns•(2) 24" Servo Extension Wires•(2) 36" Servo Extension Wires•(16) Rubber Grommets•(16) Brass Spacers•(16) Servo Mounting ScrewsNote: This ..
BEST Returnable Kit (270-1684)
The official BEST Robotics Competition Returnable kit that includes: •(1) BEST Control System Kit•(1) BEST Servo Kit•(1) BEST Motion Components..
Futaba Servo Horn (4-pack) (270-1813)
A 4-pack of Type D Futaba Servo Horns.•3/4" diameter•Predrilled holesNote: This product is not legal for use in the VEX Robotics Competition...
BEST Motion Components (270-4395)
The official motion components kit for the BEST Robotics Competition. This kit contains a number of pulleys, belts and hardware needed to build a successful BEST robot. Note: This product is not legal for use in the VEX Robotics Competition...
Thick Anti-Slip Mat (275-0120)
These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding. Size: 12 inch x 15 inchMaterial: Black Rubber over Silk Mesh ..
Thin Anti-Slip Mat (275-0121)
  These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding. Size: 12 inch x 15 inch"Material: Black Rubber over Silk Mesh ..
11  Zip Ties (100-pack) (275-0125)
  Black Tie Wraps used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake. ..
Pneumatics Kit 1 - Single Acting Cylinders (275-0274)
Pneumatic cylinders use compressed air (rather than motors) to produce motion that rests in one of 2 states: fully extended or fully retracted. The cylinder in Pneumatics Kit 1 is single-acting -- it uses air to extend the cylinder rod, but uses a spring to return to its contracted state. As a res..
Pneumatics Kit 1A - Single Acting Cylinder Add-On (275-0275)
Kit 1A adds one Cylinder (Air Push, Spring Return) to Kit 1 or Kit 2Cannot be used without Kit 1 or Kit 2Kit Includes: (1) Solenoid Driver - Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid (1) "T" Fitting - "T" Fitting for Valves - KQ2T04-00 or "-00A" (1) Cylinder - Si..
Pneumatics Kit 2 - Double Acting Cylinders (275-0276)
Kit 2 is a complete pneumatics add-on for VEX EDR. The cylinders are Double Acting, meaning they use air pressure to extend and retract the piston.Uses one VEX EDR Controller I/O port per air cylinderReservoir is filled using a standard tie pump Kit Includes: (2) Solenoid Driver - Cable w/Dri..
Pneumatics Kit 2A - Double Acting Cylinder  Add-On (275-0277)
Kit 2A adds one Cylinder (Bi-directional) to Kit 1 or Kit 2. Add-on Kit. Double Acting Cylinders. Cannot be used without Kit 1 or Kit 2.Kit Includes: (1) Solenoid Driver - Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid (1) "T" Fitting - "T" Fitting for Va..
Pneumatics Tubing (5 ) (275-0447)
    5ft. of Polyurethane Tubing for use with VEX Robotics Pneumatics. (Black, 5/32" OD) 5ft. of Polyurethane Tubing. Compatible with VEX Robotics Pneumatics. ..
Screw 6-32 x 0.250  Silver (50-pack) (275-0659)
6-32 Screw with Button Head. 5/64" VEX Allen Drive. Use for Motors and Servos only. High Strength Stainless Steel. ..
Coupler 8-32 x 0.500  (25-pack) (275-1000)
The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs. Double up standoffs Allen socket in one end 1/2" and 1" lengths ..
Coupler 8-32 x 1.000  (25-pack) (275-1001)
The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs. Double up standoffs Allen socket in one end 1/2" and 1" lengths ..
Screw 8-32 x 0.250  (100-pack) (275-1002)
8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Note: Image shows screw head and does not represent actual size of screw. Standard Allen Drive VEX screw type. High Strength Stainless Steel. ..
Screw 8-32 x 0.375  (100-pack) (275-1003)
8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel. Technical Specifications Compatibility Compatible wit..
Screw 8-32 x 0.500  (100-pack) (275-1004)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compa..
Screw 8-32 x 0.625  (100-pack) (275-1005)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compa..
Screw 8-32 x 0.750  (100-pack) (275-1006)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compa..
Screw 8-32 x 0.875  (100-pack) (275-1007)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Screw 8-32 x 1.000  (100-pack) (275-1008)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Screw 8-32 x 1.250  (50-pack) (275-1009)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Screw 8-32 x 1.500  (50-pack) (275-1010)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Screw 8-32 x 1.750  (50-pack) (275-1011)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Screw 8-32 x 2.000  (25-pack) (275-1012)
  8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.   Technical Specifications Compatibility Comp..
Standoff 0.25   (10-pack) (275-1013)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 0.50   (10-pack) (275-1014)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 0.75   (10-pack) (275-1015)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 1.00   (10-pack) (275-1016)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 1.50   (10-pack) (275-1017)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 2.00   (10-pack) (275-1018)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 2.50   (4-pack) (275-1019)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 3.00   (4-pack) (275-1020)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 4.00   (4-pack) (275-1021)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 5.00   (4-pack) (275-1022)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Standoff 6.00   (4-pack) (275-1023)
A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads. Hex size is 0.250" across the flats. Light weight aluminum. Various lengths available. ..
Washer  Steel (200-pack) (275-1024)
A washer is a thin disk with a hole used to distribute the load of a threaded fastener. VEX washers fit on all VEX screws and VEX shafts. Steel washers are a good all-purpose washer. ..
Washer  Teflon (25-pack) (275-1025)
A washer is a thin disk with a hole used to distribute the load of a threaded fastener. VEX washers fit on all VEX screws and VEX shafts. Teflon has a low friction. Use on shafts where metal rubs on metal. ..
Nut 8-32 Keps (100-pack) (275-1026)
A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads. Keps Nuts have integral external tooth lock washer. Nylock nuts have internal nylon lock. Hex nuts are non-locking. ..
Nut 8-32 Nylock (100-pack) (275-1027)
A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads. Keps Nuts have integral external tooth lock washer. Nylock nuts have internal nylon lock. Hex nuts are non-locking. ..
Nut 8-32 Hex (100-pack) (275-1028)
A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads. Keps Nuts have integral external tooth lock washer. Nylock nuts have internal nylon lock. Hex nuts are non-locking. ..
Rubber Link (4-pack) (275-1029)
A flexible link used to create flexible joints, springs, or to provide shock absorption. Flexible joints between standoffs or metal. Add spring force to your design. Provide shock absorption to delicate parts. ..
3/32" Hex Key (8-pack) (275-1030)
High Strength Allen Wrench 3/32" for the serious VEX builder. Fits the 8-32 screws. 8 Pack of 3/32" Allen Wrenches Made from high strength tempered steel. Fits 8-32 screws. ..
5/64" Hex Key (8-pack) (275-1031)
High Strength Allen Wrench 5/64" for the serious VEX builder. Fits the 6-32 screws and shaft collars. 8 Pack of 5/64" Allen Wrenches Made from high strength tempered steel. Fits 6-32 screws and shaft collars. ..
Chassis Kit  Medium 25x25 (275-1033)
VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes. Four sizes available: 15x16, 25x25, 35x35, and 35x35 super. Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 1..
Chassis Kit  Large 35x35 (275-1034)
  VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes. Four sizes available: 15x16, 25x25, 35x35, and 35x35 super. Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 1..
Drive Shaft Bar Lock (8-pack) (275-1065)
Metal version of the shaft locking part. Three locations for square shafts. Very strong. Made from cold rolled steel, 0.046" thick, zinc plated. Sold in packs of 8. Technical Specifications Downloads STEP File Materi..
Nylon Spacer Variety Pack (275-1066)
  A spacer is used to create a space between two objects, often to properly position them.  They eliminate slop on shafts, add space between metal parts and are made of plastic and nylon. Variety pack includes:(10) 0.125" Nylon Spacer(10) 0.250" Nylon Spacer(10) 0.375" Nylon Spacer(..
Rubber Band #32 (20-pack) (275-1089)
#32 Rubber Bands have dozens of uses on a robot. The spring like properties make it perfect for latches, triggers, and return mechanisms. #32 Rubber Bands Synthetic Rubber Length is 3"   Technical Specifications ..
Aluminum Structure Kit (275-1097)
Make your robot lighter! Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong. Compatible with all VEX Motion and Structure components. Available in bundle kits or in single part multi-packs ..
C-Channel 1x5x1x25 (4-pack) (275-1138)
VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance. Three sizes available. Made from cold rolled steel, 0.046" thick, zinc plated. Each channel is segmented into cuttable 2.5" pi..
C-Channel 1x5x1x35 (4-pack) (275-1139)
VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance. Three sizes available. Made from cold rolled steel, 0.046" thick, zinc plated. Each channel is segmented into cuttable 2.5" pieces &n..
Plate 25x5 (4-pack) (275-1140)
Plate 25x5 (4-pack)Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. •Available in two sizes.•Made from cold rolled steel, 0.046" thick, zinc plated...
Bar 1x25 (8-pack) (275-1141)
VEX bar with holes on 0.500" increments. Can be cut on 0.500" increments. •Made from cold rolled steel, 0.046" thick, zinc plated. •(8) Bar 1x25..
Angle 2x2x25 (4-pack) (275-1142)
VEX angle without slots, typically used for structural framing. •Can be cut on 0.500" increments•Made from cold rolled steel, 0.046" thick, zinc plated•All items are (4) to a package..
Angle 2x2x35 (4-pack) (275-1143)
VEX angle without slots, typically used for structural framing. •Can be cut on 0.500" increments•Made from cold rolled steel, 0.046" thick, zinc plated•All items are (4) to a package: Angle 2x2x35 ..
Angle 3x3x35 (4-pack) (275-1144)
VEX angle (3x3x35) without slots, typically used for structural framing. •Can be cut on 0.500" increments•Made from cold rolled steel, 0.046" thick, zinc plated•All items are (4) to a package ..
Chassis Rail 2x1x25 (4-pack) (275-1145)
The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side. •Made from cold rolled steel, 0.046" thick, zinc plated.•All items are (4) to a package...
Chassis Rail 2x1x35 (4-pack) (275-1146)
The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side. •Made from cold rolled steel, 0.046" thick, zinc plated.•All items are (4) to a package...
Screw 6-32 x 0.500  Silver (50-pack) (275-1169)
Screw 6-32 x 0.500 Silver (50-pack)..
Advanced Sensor Kit (275-1179)
  Our Most Recommended Sensors The VEX Advanced Sensor Kit provides a complete mix of our most popular sensors in a value bundle. Increase the challenge, and your robot's abilities, by adding a computer engineering and sensor implementation aspect to the robotics lab. ..
Spare Competition Field Wall Gusset (275-1182)
The VEX Field Wall Gussets are used to connect VEX Field Side Panels together.   Technical Specifications Kit Contents (2) Wall Gussets (5) 1/4-20 x .5in button head screws Old Part Number (SKU) VL-FLDSPAR..
Spare Competition Field Corner Gusset (275-1183)
  The VEX Field Corner Gussets are used to connect VEX Field Side Panels together at a 90 degree angle. (2) Corner Gussets (5) 1/4-20 x .5in button head screws ..
Spare Competition Field Hardware (275-1185)
The VEX Field Hardware is an assortment of the Hardware used to assemble the VEX Field Perimeter. (25) 1/4-20 x 1/2 inch Screws (25) 1/4-20 Nuts   Technical Specifications Kit Contents (25) 1/4-20 x 1/2 inch Screws ..
45 Degree Gusset (6-pack) (275-1186)
Need to make a 45 degree angle in your application? The 45 Degree Gusset Pack will make this task easy. Sold in packs of 6 each. 45 Degree Gusset   Technical Specifications Downloads STEP File Material Type Cold Rolled Steel per AS..
Worm Gearbox Bracket (2-pack) (275-1187)
This Bracket is designed with the VEX Worm Gear. This is the simplest way to mount and utilize the worm gears. Designed for the VEX Worm Gears. Metal only. Gears not included. Sold in a pack of 2 brackets.   Technical Specifications Ki..
Bevel Gearbox Bracket (2-pack) (275-1189)
Use additional standard VEX Motion Products (not included) to utilize this bracket with VEX Bevel Gears. There are 2 VEX Bevel Gear Brackets included in this kit. Designed for the VEX Bevel Gears. Metal only. Gears and bearings not included. Sold in a pack of 2 brackets. ..
Spare Competition Field Lexan (275-1202)
  Keep your VEX Field looking great. You can now replace your battle scarred Lexan panels. Three of these Lexan panels are used per each of the 4 sides of the VEX Field. Order an individual panel or 12 panels to replace all the Lexan sides to your VEX Field.   Technical Specif..
Spare Competition Field Control Post (275-1208)
  The VEX Field Control Post is used to hold the VEX Field Control Hardware.   Technical Specifications Contents (1) VEX Field Control Post (2) Mounting Brackets (3) 1/4-20 x .5in button head screws (5) #10-32 x .5in button head screws ..
Adhesive Foam (275-1254)
    Applications include robot bumpers, vibration isolation, accumulator backing, and any other applications requiring compression 1" wide x 0.250" thick 60" long. Cuts with scissors. Adhesive backed.   Overvie..
VELCRO Brand Adhesive Strip (5') (275-1257)
This adhesive VELCRO® Brand product has an adhesive backing so it can be attached directly to metal to hold a light weight object like a battery, create a trap door, or build a detachable part. Adhesive backing. Attach a light object like a battery. Build a trap doo..
Cinch Strap (5-pack) (275-1258)
  These VELCRO® brand Cinch Straps are great for quickly mounting objects. Wrap the Cinch Strap around the object you want mounted, loop it through the buckle, and then back onto itself for a secure hold using VELCRO® brand hook and loop fastener. The buckle allows the user to "cin..
VELCRO brand ONE-WRAP (5') (275-1259)
  VELCRO® brand ONE-WRAP® consists of 5 feet of our 0.75 inch wide VELCRO® brand ONE-WRAP® that can be used to attach a light weight object. This Wrap comes with Hook on one side and Loop on the other so that it attaches back to itself for a secure closure. Attach a ligh..
Screw 8-32 x 0.250  Locking (100-pack) (275-1260)
  These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time. The screws provide similar functionality to the VEX Nylock Nuts..
Screw 8-32 x 0.500  Locking (100-pack) (275-1261)
    These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time. The screws provide similar functionality to the VEX Ny..
Latex Tubing (10 ) (275-1262)
This VEX Tubing can stretch up to 3 times its length and still spring back to its original shape. VEX Latex Tubing is great for any application on a VEX robot requiring spring loading. Sold in two 5' lengths. 35A durometer Latex. Great for heavy lifting.   ..
Hinge (2-pack) (275-1272)
  This hinge provides a simple pivoting joint with 265 degree movement. Sold in packs of 2. 2.5" long x 1.3" wide. Standard VEX holes.   Overview VEX Hinges provide a pivoting joint between two pieces of VEX structural compo..
VEXnet Field Controller Kit (275-1401)
A full set of controllers and cables for use with the VEXnet system and/or the VEX 75MHz Crystal Radios. Field control allows for accurate starting of competition matches.Kit Contains: (1) Match Controllers (2) Driver Interfaces (1) USB A-B Cable (2) 50' Eth..
Long Aluminum Structure Kit (275-1410)
Make your robot lighter! Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong. Compatible with all VEX Motion and Structure components. Available in bundle kits or in single part multi-packs   Note: The Long A..
Swept Away Sample Game Elements (275-1412)
  Building a Swept Away robot but you don’t want to buy the official field? The Swept Away Sample Game Elements Kit contains enough for you to use for testing as your build and prototype your design. (6) 4" Green Soccer Balls (3) Orange Footballs   Sma..
8  x 8  Field Perimeter Kit (275-1413)
For those playing a game other than Swept Away, the 8x8 field perimeter is available for purchase separately. This perimeter includes mounting options for additional custom field elements, so you can attach whatever goals or pieces you want. 8 ft x 8 ft field perimieter (4) Field ..
Solenoid Driver Cable (2-pack) (275-1417)
This Pneumatic Solenoid Driver Cable is this same driver cable that is included in the Pneumatic Kits. On one end of the Driver Cable is the standard 3 wire PWM Connector which connects to a VEX Microcontroller Digital Output. On the other end is the 2 wire Pneumatic Connector which mates directly..
1/2 Thumbscrew (50-pack) (275-1485)
These plastic thumbscrews are the same size (8-32) as standard VEX screws only they have a 0.428" diameter knurled head so they can be tightened or loosened by hand.  Great for applications where a screw will be inserted or removed multiple times, such as robot access panels or battery mou..
Plate 15x5 (2-pack) (275-2023)
Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Available in two sizes. Made from cold rolled steel, 0.046" thick, zinc plated.   Technical Specifications Downloads STEP Files fo..
Showing 1 to 100 of 372 (4 Pages)