Brand: Makerbot
Product Code: 900-0073A
Availability: In Stock

Price discounted 20% off for a limited time! Print Carbon Fiber and a selection of polymers with the aid of a 60°C heated chamber.

MakerBot Method Carbon Fiber Edition

Print carbon fiber reinforced nylon and other engineering-grade composite parts with three dimensional strength and accuracy like never before on METHOD’s unique industrial desktop platform.

Strong, Heat-Resistant Metal Replacement Parts

Carbon fiber reinforced nylon is optimized for high strength, stiffness, and heat resistance making it ideal for structural applications and metal replacements. 

Excellent strength to weight ratio - 110 MPa TS - for lightweighting applications such as robotic end effectors

Engineering-grade stiffness - 7600 MPa Tensile Modulus - for structural applications such as vehicular brackets and inspection gauges

High heat resistance under load - 184°C HDT - for optimal under-hood and tooling applications

Superior Nylon Carbon Fiber Parts with METHOD

METHOD’s unique industrial feature set produces carbon fiber parts with superior three dimensional strength and accuracy

METHOD’s Heated Chamber delivers parts that are strong and accurate.

Outstanding surface finish that hides layer lines thanks to METHOD’s Ultra-Rigid Metal Frame.

Print the most complex geometries including internal cavities with soluble support, or use breakaway support for faster print times.

METHOD’s sealed filament bays help keep the material dry, resulting in better print quality and reliability, and METHOD’s pre-print spool drying feature allows for the recovery of oversaturated filament.


  • 1 MakerBot METHOD 3D Printer
  • 1 Spring Steel Build Plate
  • 1 Composite Extruder
  • 1 Performance Extruder 2 Support 
  • 1 Nozzle Brush
  • 1 Hex Key
  • 1 USB A-to-B Cable
  • 1 US Power Cord
  • 1 EU Power Cord

Please note: MakerBot materials sold separately.

Extruder Compatibility

  • Compsite Extruder 1C (included)
  • Support 2 (included)
  • MB Labs Experimental Extruder*

*sold separately

Model and Support Material Compatibility

Model Material

  • Nylon Carbon Fiber
  • PLA
  • Tough
  • PETG
  • Nylon
  • Open materials**

Support Material

  • PVA

**requires MB Labs Experimental Extruder

Method Specs:

Print Technology

Fused Deposition Modeling (FDM)

Print Heads


Dimensional Accuracy

± 0.2 mm1

Layer Resolution

Range: 20 - 400 microns

Build Speed

Up to 2x faster than desktop 3D printers2

Max Material Flow Rate: ~50 mm3 per sec

Print Head Travel Speed: Up to 500 mm per sec

Print modes tuned and optimized for:

100 microns - High Quality Print Mode (Coming Soon)

200 microns - Balanced Print Mode

Maximum Build Volume

19 L x 19 W x 19.6 H cm / 7.5 x 7.5 x 7.75 in single extrusion (print settings coming soon)

15.2 L x 19 W x 19.6 H cm / 6.0 x 7.5 x 7.75 in dual extrusion