101 Arduino Basics Starter Kit (incl. UNO Board) (ARD-01)
101 Arduino Basics Starter Kit (incl. UNO Board) (ARD-01)
Brand: OSEPP
Product Code: ARD-01
Availability: In Stock
$59.99



 

Arduino Basics

  • Discover Arduino through EASY and FUN lessons
  • Step-by-step instructions with diagrams
  • No prior electronics knowledge required
  • Kit comes with everything you need to build your own:
    • Volt Meter
    • LED Game
    • Buzzer Circuit and play melody
    • INCLUDES the OSEPP UNO R3 PLUS board!



Arduino Starter Kit Includes:

OSEPP UNO R3 Plus1
6 feet USB type A to mini-B1
Tact push switch 6mm x 6mm – through hole2
DIP switch 4 position – through hole1
1Kohm potentiometer (variable resistor) – long pins1
10Kohm potentiometer (variable resistor) – long pins1
330 ohm axial resistor, 1/2W, 5%20
1 kohm axial resistor, 1/2W, 5%5
10kohm axial resistor, 1/2W, 5%5
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA2
LED through hole – Yellow,  8.7mm height, ~2V drop, ~10-20mA2
LED through hole – Green,  8.7mm height, ~2V drop, ~10-20mA2
LED through hole – White,  8.7mm height, ~2V drop, ~10-20mA2
LED through hole – Blue,  8.7mm height, ~2V drop, ~10-20mA2
Two digits 7-segment LED – RED2
Buzzer, 5Vo-p1
NPN transistor2
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND)1
Ribbon Jumper Cables40
9 Volt Battery Connector1
2cm x 2cm x 3mm thick double side tape2
Information sheet – Arduino UNO diagram + basic electronic theory1
Kit container1


 


OSEPP UNO R3 Plus Specifications

MicrocontrollerATmega328P
Clock Speed16 MHz
Flash Memory32 KB
SRAM2 KB
EEPROM1 KB
Operating Voltage5V
Input Voltage6-12 V
Digital I/O Pin Count14 (including 6 for PWM output)
Analog Input Pin Count6

 

Other ConnectionsMini-USBICSP for ATmega2560DC power connector4-pin latchable Molex connector
Dimensions2.95 x 2.13 x 0.61 inches (75.0 x 54.0 x 15.5 mm)
Power SourceUSB or external DC power supply