The 2-Wire Motor 393 is the primary actuator used in the VEX Robotics Design System. Build rotational mechanisms, drive bases, rotational joints, conveyor belts - anything that spins can be built using the 2-wire Motor 393.
- Strong, steel internal gears.
- Can be configured into a "high speed" version.
The 2-Wire Motor 393 does not have an internal motor controller.
The motor connects directly to 2-Wire Motor Ports (Ports 1 & 10 on the Cortex Microcontroller). For 3-Wire Motor Ports (Ports 2-9 on the Cortex), a Motor Controller 29 must be used in between the Microcontroller and the motor.
|Downloads & Docs||
Instruction Sheet - 2-Wire Motor 393
All VEX Square Shafts 0.125" (3.2mm)
2-Wire Motor Ports
3-Wire Motor Ports (with a Motor Controller 29)
|Notes||Motor Case screws are M2x0.6x10mm Self Tapping.|